Skip to content

Used Reverend AirSonic W Metallic Red Burst Electric Guitar With HSC

SKU 80REV004
Sold out
Original price $ 899.00 - Original price $ 899.00
Original price
$ 899.00
$ 899.00 - $ 899.00
Current price $ 899.00

This used Reverend Airsonic W is in great condition, and includes an original Reverend two tone case, please see pics! Lots of life still left in the frets, and the playability/toine are incredible! Great instrument at a. great price!

 

Reverend Founder Joe Naylor has been on a quest to meld a solid body’s sustain and attack with the rich, big tone of a semi-hollow. Naylor’s sonic dream is now a reality with the introduction of the Reverend Airsonic. Radically thinner wings and thru-body f-holes allow the body to resonate intensely, while a thick center ridge establishes solid sustain. Harmonics shimmer, single notes sing, and power chords ring like a bell at stage volume. Add in overdrive, and the controllable feedback is a thing of beauty. With the forearm and stomach contours, this guitar is light and comfortable. The Airsonic W has Railhammer Humcutters that capture the clarity and dynamics of a P90 without the hum. A Wilkinson WVS50 IIK Tremolo in the bridge rounds out the package. If you’re ready to make a unique visual and sonic statement, the Airsonic W is for you!

 

RAILHAMMER PICKUPS

Rails under the wound strings for tight lows. Poles under the plain strings for fat highs. This revolutionary design from Reverend founder Joe Naylor delivers exceptional clarity and punch, that will get you heard loud and clear!

ROASTED MAPLE NECK

Roasted Maple is heat treated at over 300° F to remove sugars, moisture, and impurities. This maple is lighter, more stable, and has a beautiful caramel color. The result is an exceptional maple neck that will require less seasonal adjustment, and boasts a rich vintage look!

KORINA BODY

Korina (aka White Limba) is a medium-light weight wood, highly prized for consistency and tonal qualities. Often found in boutique and vintage instruments, all Reverends feature Korina bodies. A highly resonant wood, Korina is a key factor to producing our lively, responsive instruments that are rich in harmonics.

BASS CONTOUR

This passive bass roll-off is great for tightening up the low end, or re-voicing the pickups. It can make a humbucker sound like a single-coil, or give a P-90 that classic twang. Variable pickup voicing at your fingertips!

PIN-LOCK TUNERS

A thumbwheel under the tuner pushes a steel pin up through the post, locking the string in place for exceptional tuning stability and super-fast string changes.

INITIALED HEADSTOCK

Every Reverend is hand initialed and serial numbered on the back of the headstock by one of our highly skilled technicians who sets up, inspects, and tests every instrument.

WILKINSON WVS50 IIK TREMOLO

Features include saddles that lock to the baseplate, adjustable arm swing tension, and a push-in/no freeplay arm. Combined with our boneite nut and pin-lock tuners, it stays in tune even under aggressive whammy action.

VARI-CLAW TREMOLO CLAW

This innovative claw gives you the option of 3 springs in the middle for a firm tremolo feel, or 2 springs on the outside for a softer feel. The offset hook design lets you switch between 3 or 2 springs, with little or no cumbersome adjustment of the claw needed.

CUSTOM DOME KNOBS

Our proprietary knobs feature a lower profile which is less likely to be accidentally hit by the player's hand, and the white dot lets you easily see where your knob rotation is set.

BONEITE NUT

We use "Boneite," a synthetic bone nut, that is more consistent than natural bone, on all Reverend instruments. It reduces friction, allowing the strings to slide through the nut slots smoothly, improving tuning stability.

TRIPLE-TREE STRING TREE

This patent-pending string tree has an extended bar to hold down three strings at a time with just one tree, eliminating G string buzz in the nut slot.

DUAL-ACTION TRUSS ROD

Our dual action rod adjusts in both directions, allowing back bow or forward bow. This assures correct adjustment range is possible regardless of string tension, extreme climate conditions, or the effects of long term aging. It’s also located at the headstock for easy access.

SIX-BOLT NECK PLATE

Two extra bolts increase mounting pressure of the neck by fifty percent. This makes a stronger neck connection, which improves sustain, tuning stability, and neck alignment.

PURE TONE JACK

All Reverends use an upgraded jack by Pure Tone Technologies. A standard jack has single contacts, but the Pure Tone jack has dual contacts for improved grip, audio signal and reliability. The most dependable guitar jack available.

TREBLE BLEED CIRCUIT

All Reverend guitars have a treble bleed circuit, preserving the treble when you roll back the volume control. When you roll back a standard volume control, the tone loses treble and becomes dull sounding. Now you can turn down and still sound great!

10% POTS

We use Alpha control pots with a +-10% rating. While a typical pot is +-20%, our pots are built to tighter specifications, making them more consistent. Typically used in expensive boutique guitars, but standard issue in all Reverends.

10% POLY CAPS

We use caps with a +-10% rating, while a typical cap is +-20%. Our caps are made to tighter specifications, so they’re more consistent. Made of polyester, they’re also longer lasting, and less affected by temperature than cheaper ceramic caps. Typically used in expensive boutique guitars.

BODY

Korina Solidbody

PICKUPS

Huevos 90 Bridge, Nuevo 90 Neck

BRIDGE

Wilkinson WVS50 IIK Tremolo

NECK

Roasted Maple

SCALE

25 1/2"

NECK PROFILE

Medium Oval

FINGERBOARD

Pau Ferro or Roasted Maple 12" Radius

FRETS

22 Medium Jumbo

TRUSS ROD

Dual Action - Headstock Access

TUNERS

Reverend Pin-Lock

NUT

43mm Width - Boneite

CONTROLS

Volume, Tone, Bass Contour, 3-way

STRINGS

10-46

CASE

LG Two-Toned Teardrop Included!